下面罗茨风机厂家小编就为大家带来罗茨风机皮带发热的解决方法？

The following roots blower manufacturers small series to bring you roots blower belt heating solution?

过紧的皮带会导致皮带发热，而且会影响风机联动，在动力传输过程中损耗，过紧的皮带甚至有可能会在运转过程中崩断，所以，无论过松还是过紧都不好，因此，风机厂家们出厂时应该对风机各方面指标进行严格测试，确保风机运转正常。

Too tight belt will lead to belt heating, and will affect the fan linkage, loss in the process of power transmission, too tight belt may even break in the process of operation, so, whether too loose or too tight is not good, therefore, fan manufacturers should carry out strict testing on all aspects of fan indicators when leaving the factory, to ensure the normal operation of the fan.

导致罗茨风机皮带出现问题的原因通常是皮带过松，这样都会导致罗茨风机皮带发热。

The reason that causes the problem of Roots blower belt is that the belt is too loose, which will lead to the heating of Roots blower belt.

罗茨风机厂家在罗茨风机出厂前都应该将风机的皮带调整到合适松紧的状态，这样才能保证风机运转通畅，过松的皮带不仅会导致发热，而且还会出现脱落损坏的现象。

Before the roots blower leaves the factory, the manufacturer of Roots blower should adjust the belt of the blower to a proper elastic state, so as to ensure the smooth operation of the blower. Too loose belt will not only cause heat, but also cause falling off and damage.

相关文章： 陕西离心式风机厂家 净化器 气力输送设备厂家 油烟 甘肃回转风机厂家